•
1 7
  • F522DP

F522DP

Welder gloves

  • Natural split leather gloves
  • 7cm split leather cuff with external palm reinforcement
  • Reinforced palm and heat resistant
  • Excellent tear resistance
  • 200 degree centigrade  contact heat resistance for 15 seconds 

Tear Resistant

Dexterity

Sparks

Flame Resistant

Heat

RESIST UPTO 200 DEGREE CONTACT HEAT FOR 15 SEC

Select Size
Bulk Orders

For Bulk Orders, Fill out the enquiry form and someone from our team will get back to you as soon as possible.

MDS

EN388:2016+A1:2018

EN407:2020

Delivery & Services

Easy Return

with our 15 days return poicy

Rs. 0
Rs. 0

Tax included. Shipping calculated at checkout.
Pop-up link text View full details
  • Product Features
  • Product Details
  • Tests
  • Reviews

ABOUT THE DESIGN

USEFUL IN THESE INDUSTRIES

AUTOMOBILE

IRON & STEEL

METALLURGY

REPAIRS & MAINTENANCE

  • Key Features: • Natural split leather gloves. • Reinforcement on palm. • 7 cm cuff length. • Easy to wear. • Good protection against mechanical hazards and metal splashes.
  • Design: • Extended cuff. • Extra leather patch for artery protection.
  • Remarks: • This gloves does not contain substance known as being carcinogenic, neither toxic, nor likely to cause allergies to sensitive people. • It is generally recommended that leather gloves be dry cleaned. Soap and water removes the natural oils present in the leather, causing them to stiffen and become brittle. • The leather used in the manufature of this glove has chrome and PH within permissible limits. • Easy to wear and remove the gloves.
  • Test Conducted:
  • • Abrasion as per EN 388 is 2: Resistance to abrasion Based on the number of cycles required to abrade through the sample glove (abrasion by sandpaper under a stipulated pressure). The protection factor is then indicated on a scale from 1 to 4 depending on how many revolutions are required to make a hole in the material. The higher the number, the better the glove.
  • • Cut as per EN 388 is 1: Blade cut resistance Based on the number of cycles required to cut through the sample at a constant speed. The protection factor is then indicated on a scale from 1 to 5.
  • • Tear as per EN 388 is 2: Tear resistances Based on the amount of force required to tear the sample.The protection factor is then indicated on a scale from 1 to 4.
  • • Puncture as per EN 388 is 2: Puncture resistances Based on the amount of force required to pierce the sample with a standard sized point. The protection factor is then indicated on a scale from 1 to 4.
  • • Test E TDM blade cut resistant as per EN 388 is X (X means not tested): The glove sample is placed on a conductive strip and loaded onto the TDM-100. When the metal blade touches the metal strip, the test is terminated.A straight blade is loaded into the machine.Weight is added to serve as force.The blade moves across the fabric.The blade is replaced with a new one to ensure accuracy.The sample is cut five times, each with three different load.The distance traveled to cause cut through at various forces is recorded.The data is used to determine the load required to cut through the sample.
    • • Resistance to flammability is 1: The glove’s material is stretched and lit with a gas flame. The flame is held against the material for 15 seconds. After the gas flame is distinguished, the length of time is measured for how long the material either glows or burns.
  • • Resistance to contact heat is 2: The glove’s material is exposed to temperatures between +100°C and +500°C. The length of time is then measured for how long it takes the material on the inside of the glove to increase by 10°C from the starting temperature (approx. 25°C). 15 seconds is the minimum accepted length of time for approval. For example: to be marked with class 2, the glove’s inside material must manage 250°C heat for 15 seconds before the material exceeds 35°C.
  • • Resistance to convective heat is 3: The amount of time is measured for the heat from a gas flame (80Kw/kvm) to increase the temperature of the glove’s inside material by 24°C.
  • • Resistance to radiant heat is 4: The glove’s material is stretched in front of a heat source with an effect of 20-40 kw/kvm. The average time is measured for heat penetration of 2.5 kw/kvm.
  • • Resistance to small splashes of molten metal is 5: The test is based on the total number of drops of molten metal required to increase the temperature by 40°C between the inside of the glove and the skin.
  • • Resistance to large splashes of molten metal is 6: Molten metal is then poured over the glove material. The total number of grams is measured of how much molten metal is required to damage the simulated skin.

    • Customer Reviews

    Based on 1 review
    0%
    (0)
    100%
    (1)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    v
    vivek
    Slip resistant

    fits better than others

     
     

    Product Features

    ABOUT THE DESIGN

    USEFUL IN THESE INDUSTRIES

    AUTOMOBILE

    IRON & STEEL

    METALLURGY

    REPAIRS & MAINTENANCE

    Product Details

  • Key Features: • Natural split leather gloves. • Reinforcement on palm. • 7 cm cuff length. • Easy to wear. • Good protection against mechanical hazards and metal splashes.
  • Design: • Extended cuff. • Extra leather patch for artery protection.
  • Remarks: • This gloves does not contain substance known as being carcinogenic, neither toxic, nor likely to cause allergies to sensitive people. • It is generally recommended that leather gloves be dry cleaned. Soap and water removes the natural oils present in the leather, causing them to stiffen and become brittle. • The leather used in the manufature of this glove has chrome and PH within permissible limits. • Easy to wear and remove the gloves.

    • Tests

  • Test Conducted:
  • • Abrasion as per EN 388 is 2: Resistance to abrasion Based on the number of cycles required to abrade through the sample glove (abrasion by sandpaper under a stipulated pressure). The protection factor is then indicated on a scale from 1 to 4 depending on how many revolutions are required to make a hole in the material. The higher the number, the better the glove.
  • • Cut as per EN 388 is 1: Blade cut resistance Based on the number of cycles required to cut through the sample at a constant speed. The protection factor is then indicated on a scale from 1 to 5.
  • • Tear as per EN 388 is 2: Tear resistances Based on the amount of force required to tear the sample.The protection factor is then indicated on a scale from 1 to 4.
  • • Puncture as per EN 388 is 2: Puncture resistances Based on the amount of force required to pierce the sample with a standard sized point. The protection factor is then indicated on a scale from 1 to 4.
  • • Test E TDM blade cut resistant as per EN 388 is X (X means not tested): The glove sample is placed on a conductive strip and loaded onto the TDM-100. When the metal blade touches the metal strip, the test is terminated.A straight blade is loaded into the machine.Weight is added to serve as force.The blade moves across the fabric.The blade is replaced with a new one to ensure accuracy.The sample is cut five times, each with three different load.The distance traveled to cause cut through at various forces is recorded.The data is used to determine the load required to cut through the sample.
    • • Resistance to flammability is 1: The glove’s material is stretched and lit with a gas flame. The flame is held against the material for 15 seconds. After the gas flame is distinguished, the length of time is measured for how long the material either glows or burns.
  • • Resistance to contact heat is 2: The glove’s material is exposed to temperatures between +100°C and +500°C. The length of time is then measured for how long it takes the material on the inside of the glove to increase by 10°C from the starting temperature (approx. 25°C). 15 seconds is the minimum accepted length of time for approval. For example: to be marked with class 2, the glove’s inside material must manage 250°C heat for 15 seconds before the material exceeds 35°C.
  • • Resistance to convective heat is 3: The amount of time is measured for the heat from a gas flame (80Kw/kvm) to increase the temperature of the glove’s inside material by 24°C.
  • • Resistance to radiant heat is 4: The glove’s material is stretched in front of a heat source with an effect of 20-40 kw/kvm. The average time is measured for heat penetration of 2.5 kw/kvm.
  • • Resistance to small splashes of molten metal is 5: The test is based on the total number of drops of molten metal required to increase the temperature by 40°C between the inside of the glove and the skin.
  • • Resistance to large splashes of molten metal is 6: Molten metal is then poured over the glove material. The total number of grams is measured of how much molten metal is required to damage the simulated skin.

    • Reviews

    People also Look For

    ALASKA

    High Ankle Leather Boot

    BARBET 01

    Heavyweight Outdoor Shoe

    BARBET 02

    Lightweight High Ankle Safety Shoe

    BARBET 06

    Lightweight Low Ankle Safety Shoe

    BINX

    Barton Grain Ankle Leather Shoe

    BIRMAN

    Low Ankle Safety Shoe

    CARACAL

    High Ankle Leather Boot

    CHEETAH

    Low Ankle Leather Boot

    CIVET

    Low Ankle Safety Shoe

    COLE

    Ankle Safety Boot

    People also bought together

    AVIOR

    Interchangeable Safety Goggles

    LOREX

    Low Ankle Safety Shoe

    DIAMOND XIII

    Safety Helmet

    F437 (Pack of 4)

    Welder Gloves

    DIAMOND XII

    Safety Helmet

    P35NBA

    Seamless Nitrile Gloves

    JASPER XV

    Lightweight Safety Helmet

    D232

    Driver Gloves

    WT5NBG

    Seamless Nitrile Gloves

    PR4NGB

    Seamless Nitrile Gloves