•
1 7
  • H515A

H515A

Welder leather gloves

  • Fire & heat resistant welder gloves
  • Aluminized preox fabric used at back & thumb
  • 15cm split cuff in length
  • Sewn with para-aramid thread
  • Palm lined with fleecy fabric & canvas at the back of the cuff

Flame Resistant

Heat Resistant

Select Size

H515A

H515A

Size Chart

How to Measure

H515A

H515A

H515A

H515A
Bulk Orders

For Bulk Orders, Fill out the enquiry form and someone from our team will get back to you as soon as possible.

MDS

Delivery & Services

Easy Return

with our 15 days return poicy

Rs. 0
Rs. 0

Tax included. Shipping calculated at checkout.
Pop-up link text View full details
  • Product Features
  • Product Details
  • Tests
  • Reviews

ABOUT THE DESIGN

USEFUL IN THESE INDUSTRIES

AUTOMOBILE

IRON & STEEL

METALLURGY

REPAIRS & MAINTENANCE

  • Key Features: • 4 tips dyed red split welder glove with aluminised preox fabric back. • 15cm natural split cuff.
  • Design: • Fire and heat resistant welder glove. • Aluminized preox fabric used at back and thumb. • Palm lined with fleecy fabric and canvas at the back of the cuff. • Sewn with kevlar thread.
  • Remarks: • This gloves does not contain substance known as being carcinogenic, neither toxic nor likely to cause allergies to sensitive people. • It is generally recommended that leather gloves be dry cleaned. Soap and water remove the natural oils present in the leather, causing them to stiffen and become brittle. • The leather used in the manufacture of this glove has chrome and PH within permissible limits. Internal test reports available on demand for PH, CR VI, EN 388 and EN 407.
  • Test Conducted:
  • • Abrasion as per EN 388 is 2: Resistance to abrasion based on the number of cycles required to abrade through the sample glove (abrasion by sandpaper under a stipulated pressure). The protection factor is then indicated on a scale from 1 to 4 depending on how many revolutions are required to make a hole in the material. The higher the number, the better the glove.
  • • Cut as per EN 388 is 1: Blade cut resistance based on the number of cycles required to cut through the sample at a constant speed. The protection factor is then indicated on a scale from 1 to 5.
  • • Tear as per EN 388 is 2: Tear resistances based on the amount of force required to tear the sample. The protection factor is then indicated on a scale from 1 to 4.
  • • Puncture as per EN 388 is 2: Puncture resistances based on the amount of force required to pierce the sample with a standardly sized point. The protection factor is then indicated on a scale from 1 to 4.
  • • TDM blade cut resistant as per EN 388 is X (X means not tested): The glove sample is placed on a conductive strip and loaded onto the TDM-100. When the metal blade touches the metal strip, the test is terminated. A straight blade is loaded into the machine. Weight is added to serve as force. The blade moves across the fabric. The blade is replaced with a new one to ensure accuracy. The sample is cut five times, each with three different load. The distance traveled to cause cut through at various forces is recorded. The data is used to determine the load required to cut through the sample.
  • • Resistance to flammability: The glove’s material is stretched and lit with a gas flame. The flame is held against the material for 15 seconds. After the gas flame is distinguished, the length of time is measured for how long the material either glows or burns.
  • • Resistance to contact heat: The glove’s material is exposed to temperatures between +100°C and +500°C. The length of time is then measured for how long it takes the material on the inside of the glove to increase by 10°C from the starting temperature (approx. 25°C). 15 seconds is the minimum accepted length of time for approval. For example: to be marked with class 2, the glove’s inside material must manage 250°C heat for 15 seconds before the material exceeds 35°C.
  • • Resistance to convective heat: The amount of time is measured for the heat from a gas flame (80Kw/kvm) to increase the temperature of the glove’s inside material by 24°C. • Resistance to radiant heat: The glove’s material is stretched in front of a heat source with an effect of 20-40 kw/kvm. The average time is measured for heat penetration of 2.5 kw/kvm.
  • • Resistance to small splashes of molten metal: The test is based on the total number of drops of molten metal required to increase the temperature by 40°C between the inside of the glove and the skin.
  • • Resistance to large splashes of molten metal: Molten metal is then poured over the glove material. The total number of grams is measured by how much molten metal is required to damage the simulated skin.

    • Customer Reviews

    Based on 1 review
    100%
    (1)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    R
    Rakesh
    good

    safe to work with

     
     

    Product Features

    ABOUT THE DESIGN

    USEFUL IN THESE INDUSTRIES

    AUTOMOBILE

    IRON & STEEL

    METALLURGY

    REPAIRS & MAINTENANCE

    Product Details

  • Key Features: • 4 tips dyed red split welder glove with aluminised preox fabric back. • 15cm natural split cuff.
  • Design: • Fire and heat resistant welder glove. • Aluminized preox fabric used at back and thumb. • Palm lined with fleecy fabric and canvas at the back of the cuff. • Sewn with kevlar thread.
  • Remarks: • This gloves does not contain substance known as being carcinogenic, neither toxic nor likely to cause allergies to sensitive people. • It is generally recommended that leather gloves be dry cleaned. Soap and water remove the natural oils present in the leather, causing them to stiffen and become brittle. • The leather used in the manufacture of this glove has chrome and PH within permissible limits. Internal test reports available on demand for PH, CR VI, EN 388 and EN 407.

    • Tests

  • Test Conducted:
  • • Abrasion as per EN 388 is 2: Resistance to abrasion based on the number of cycles required to abrade through the sample glove (abrasion by sandpaper under a stipulated pressure). The protection factor is then indicated on a scale from 1 to 4 depending on how many revolutions are required to make a hole in the material. The higher the number, the better the glove.
  • • Cut as per EN 388 is 1: Blade cut resistance based on the number of cycles required to cut through the sample at a constant speed. The protection factor is then indicated on a scale from 1 to 5.
  • • Tear as per EN 388 is 2: Tear resistances based on the amount of force required to tear the sample. The protection factor is then indicated on a scale from 1 to 4.
  • • Puncture as per EN 388 is 2: Puncture resistances based on the amount of force required to pierce the sample with a standardly sized point. The protection factor is then indicated on a scale from 1 to 4.
  • • TDM blade cut resistant as per EN 388 is X (X means not tested): The glove sample is placed on a conductive strip and loaded onto the TDM-100. When the metal blade touches the metal strip, the test is terminated. A straight blade is loaded into the machine. Weight is added to serve as force. The blade moves across the fabric. The blade is replaced with a new one to ensure accuracy. The sample is cut five times, each with three different load. The distance traveled to cause cut through at various forces is recorded. The data is used to determine the load required to cut through the sample.
  • • Resistance to flammability: The glove’s material is stretched and lit with a gas flame. The flame is held against the material for 15 seconds. After the gas flame is distinguished, the length of time is measured for how long the material either glows or burns.
  • • Resistance to contact heat: The glove’s material is exposed to temperatures between +100°C and +500°C. The length of time is then measured for how long it takes the material on the inside of the glove to increase by 10°C from the starting temperature (approx. 25°C). 15 seconds is the minimum accepted length of time for approval. For example: to be marked with class 2, the glove’s inside material must manage 250°C heat for 15 seconds before the material exceeds 35°C.
  • • Resistance to convective heat: The amount of time is measured for the heat from a gas flame (80Kw/kvm) to increase the temperature of the glove’s inside material by 24°C. • Resistance to radiant heat: The glove’s material is stretched in front of a heat source with an effect of 20-40 kw/kvm. The average time is measured for heat penetration of 2.5 kw/kvm.
  • • Resistance to small splashes of molten metal: The test is based on the total number of drops of molten metal required to increase the temperature by 40°C between the inside of the glove and the skin.
  • • Resistance to large splashes of molten metal: Molten metal is then poured over the glove material. The total number of grams is measured by how much molten metal is required to damage the simulated skin.

    • Reviews

    People also Look For

    ARMOREX

    Rs. 0

    Para Aramid Sleeve

    B33NBG

    Rs. 0

    Seamless Nitrile Gloves

    BE2208

    Rs. 0

    Natural Cow Grain Driver Glove

    C042

    Rs. 0

    Canadian Gloves

    C0705D

    Rs. 0

    Knitted Gloves

    C1032D

    Rs. 0

    Knitted Gloves

    C1045DD

    Rs. 0

    C231

    Rs. 0

    Canadian Gloves

    C232R

    Rs. 0

    Canadian Gloves

    C242

    Rs. 0

    Canadian Gloves

    People also bought together

    ALASKA

    Rs. 4,000

    High Ankle Leather Boot

    BARBET 01

    Rs. 0

    Heavyweight Outdoor Shoe

    BARBET 02

    Rs. 0

    Lightweight High Ankle Safety Shoe

    BARBET 06

    Rs. 0

    Lightweight Low Ankle Safety Shoe

    BINX

    Rs. 0

    Barton Grain Ankle Leather Shoe

    BIRMAN

    Rs. 0

    Low Ankle Safety Shoe

    CARACAL

    Rs. 0

    High Ankle Leather Boot

    CHEETAH

    Rs. 0

    Low Ankle Leather Boot

    16%OFF

    CIVET

    Rs. 1,500 Rs. 1,251

    Low Ankle Safety Shoe

    COLE

    Rs. 0

    Ankle Safety Boot