1 7

M284

Black & Yellow Gloves

Material Composition:
Palm: The palm is made of dyed yellow grain leather, offering durability, flexibility, and a good grip, essential for welding tasks.
Back: Similarly, the back of the glove is composed of dyed yellow grain leather with a yellow knuckle guard, ensuring uniform protection and resilience.
Cuff: The glove features a 15 cm split cuff with Hi-Vis fabric tape stitching, offering extended protection to the wrist area and enhancing visibility in low-light conditions.
Binding: Not applicable (NA), indicating that there is no specific binding used in the construction of the glove.
Liner: The palm is lined with para-aramid with cotton platting, offering excellent heat resistance and comfort during wear, while the cuff is lined with canvas for additional protection and durability.
Color:
Palm: Yellow, offering high visibility and a vibrant appearance.
Back: Black, providing a neutral color that hides dirt and stains well.
Specifications:
Hand Length: 250 mm (size 9), ensuring a proper fit for most users.
Weight per Pair: 100 (±5) grams (size 9), indicating a lightweight design suitable for prolonged wear without causing discomfort or fatigue.

Abrasion

Dry Environment

Cuff

Grip

M284

Size Chart

How to Measure

M284

Product variants

Bulk Orders

For Bulk Orders, Fill out the enquiry form and someone from our team will get back to you as soon as possible.

MDS

EN 21420:2024

Delivery & Services

Easy Return

with our 15 days return poicy

Rs. 0

Tax included. Shipping calculated at checkout.

View full details

Product Details
Tests
Reviews

Key Features: Yellow grain leather nechanical gloves with black spandex fabric back, Provides good mechanical resistant and comfort, Total wt/ pair (g)- 100 gm, Chromium VI free leather according to EN 21420:2020 standard.

Test Conducted:

• Abrasion as per EN 388 is 2: Resistance to abrasion based on the number of cycles required to abrade through the sample glove (abrasion by sandpaper under a stipulated pressure). The protection factor is then indicated on a scale from 1 to 4 depending on how many revolutions are required to make a hole in the material. The higher the number, the better the glove.

• Cut as per EN 388 is 1: Blade cut resistance based on the number of cycles required to cut through the sample at a constant speed. The protection factor is then indicated on a scale from 1 to 5.

• Tear as per EN 388 is 2: Tear resistances based on the amount of force required to tear the sample. The protection factor is then indicated on a scale from 1 to 4.

• Puncture as per EN 388 is 2: Puncture resistances based on the amount of force required to pierce the sample with a standardly sized point. The protection factor is then indicated on a scale from 1 to 4.

• TDM blade cut resistant as per EN 388 is X (X means not tested): The glove sample is placed on a conductive strip and loaded onto the TDM-100. When the metal blade touches the metal strip, the test is terminated. A straight blade is loaded into the machine. Weight is added to serve as the force. The blade moves across the fabric. The blade is replaced with a new one to ensure accuracy. The sample is cut five times, each with three different loads. The distance traveled to cause cut through at various forces is recorded. The data is used to determine the load required to cut through the sample.