1 7

M35NBV

Name: M35NBV
Brand: Mallcom (India) Limited
Rating: 4.3 (363 reviews)

Seamless Nitrile gloves

Black palm Foamyflex ® coated NBR gloves
Nylon and spandex blended 15 gauge seamless glove liner
Foamyflex ® coating technology
Light coating with foam finish

Abrasion

Tear Resistant

Dexterity

Select Size

Product variants

Bulk Orders

For Bulk Orders, Fill out the enquiry form and someone from our team will get back to you as soon as possible.

MDS

EN 388

Delivery & Services

Easy Return

with our 15 days return poicy

Rs. 0

Tax included. Shipping calculated at checkout.

View full details

Product Features
Product Details
Tests
Reviews

ABOUT THE DESIGN

USEFUL IN THESE INDUSTRIES

MATERIAL HANDLING

REPAIRS & MAINTENANCE

LOGISTICS

MANUFACTURING

ELECTRONICS

Key Features: • Nitrile coated palm and finger on grey nylon and spandex shell. • Construction gives you excellent hand dexterity with foamy flex finish. • Coloured X-yarn fused binding. • Knitted wrist for enhanced grip.

Design: Black coloured nitrile coated on palm and finger.

Remarks: • Nitrile provides usefulness in an oily and slippery environment. • These gloves can be used effectively to resist chemical and abrasion hazard. • Lightweight gloves ensure comfort. • Textile with sanitized hygiene function for long lasting freshness. • Sanitized is a registered trademark of sanitized AG. • This product includes the active biocidal substance zinc pyrithione.

Test Conducted:

• Abrasion as per EN 388 is 4: Resistance to abrasion based on the number of cycles required to abrade through the sample glove (abrasion by sandpaper under a stipulated pressure). The protection factor is then indicated on a scale from 1 to 4 depending on how many revolutions are required to make a hole in the material. The higher the number, the better the glove.

• Cut as per EN 388 is 1: Blade cut resistance based on the number of cycles required to cut through the sample at a constant speed. The protection factor is then indicated on a scale from 1 to 5.

• Tear as per EN 388 is 1: Tear resistances based on the amount of force required to tear the sample. The protection factor is then indicated on a scale from 1 to 4.

• Puncture as per EN 388 is 1: Puncture resistances based on the amount of force required to pierce the sample with a standardly sized point. The protection factor is then indicated on a scale from 1 to 4.

• TDM blade cut resistant as per EN 388 is X (X means not tested): The glove sample is placed on a conductive strip and loaded onto the TDM-100. When the metal blade touches the metal strip, the test is terminated. A straight blade is loaded into the machine. Weight is added to serve as the force. The blade moves across the fabric. The blade is replaced with a new one to ensure accuracy. The sample is cut five times, each with three different loads. The distance travelled to cause cut through at various forces is recorded. The data is used to determine the load required to cut through the sample.

Product Features