1 7

LFKY

Name: LFKY
Brand: Mallcom (India) Limited
Rating: 4.3 (363 reviews)

Cut & Sewn Nitrile Gloves

Light full yellow nitrile coated gloves.
Cotton interlock knitted fabric lining.
Cut and sewn with knitted wrist.

OIL RESISTANT

ABRASION

Select Size

LFKY

Size Chart

How to Measure

LFKY

Product variants

Bulk Orders

For Bulk Orders, Fill out the enquiry form and someone from our team will get back to you as soon as possible.

MDS

EN 388:2016+A1:2018

Delivery & Services

Easy Return

with our 15 days return poicy

Rs. 0

Tax included. Shipping calculated at checkout.

View full details

Product Features
Product Details
Tests
Reviews

ABOUT THE DESIGN

USEFUL IN THESE INDUSTRIES

MATERIAL HANDLING

OIL & GAS

PAINT & CHEMICAL

PETROCHEMICAL

Cotton interlock knitted fabric lining.

Test Conducted:

• Abrasion as per EN 388 is 4: Resistance to abrasion based on the number of cycles required to abrade through the sample glove (abrasion by sandpaper under a stipulated pressure). The protection factor is then indicated on a scale from 1 to 4 depending on how many revolutions are required to make a hole in the material. The higher the number, the better the glove.

• Cut as per EN 388 is 1: Blade cut resistance based on the number of cycles required to cut through the sample at a constant speed. The protection factor is then indicated on a scale from 1 to 5.

• Tear as per EN 388 is 2: Tear resistances based on the amount of force required to tear the sample. The protection factor is then indicated on a scale from 1 to 4.

• Puncture as per EN 388 is 1: Puncture resistances based on the amount of force required to pierce the sample with a standardly sized point. The protection factor is then indicated on a scale from 1 to 4.

• TDM blade cut resistant as per EN 388 is X (X means not tested): The glove sample is placed on a conductive strip and loaded onto the TDM-100. When the metal blade touches the metal strip, the test is terminated. A straight blade is loaded into the machine. Weight is added to serve as a force. The blade moves across the fabric. The blade is replaced with a new one to ensure accuracy. The sample is cut five times, each with three different loads. The distance traveled to cause cut through at various forces is recorded. The data is used to determine the load required to cut through the sample.

Product Features

ABOUT THE DESIGN

USEFUL IN THESE INDUSTRIES

MATERIAL HANDLING

OIL & GAS

PAINT & CHEMICAL

PETROCHEMICAL

Product Details

Cotton interlock knitted fabric lining.

Tests

Test Conducted:

• Cut as per EN 388 is 1: Blade cut resistance based on the number of cycles required to cut through the sample at a constant speed. The protection factor is then indicated on a scale from 1 to 5.

• Tear as per EN 388 is 2: Tear resistances based on the amount of force required to tear the sample. The protection factor is then indicated on a scale from 1 to 4.